Secure your cylinder locks against core pulling

In this article we are going to talk about the protection of cylinder locks against core pulling. For the sake of completeness, we explain what a cylinder lock is. Then we describe how core pulling works and how you can protect the lock against it. And what to look for to buy a good cylinder lock. And you see to buy the best locks is from M&C.

What is a cylinder lock?

Door locks used to work with a so-called beard key. They are still widely used inside the home, but they are not safe enough for exterior doors. The key of a cylinder lock has a large number of teeth and notches. When it is inserted into a lock, the cylinder is free to rotate. Turning to the right locks the door and unlocks it the other way around.

What is core pulling and how to secure it?

During core pulling, the cylinder is pulled out of the lock. A hardened screw is screwed into the keyhole. Once it is properly secured, the cylinder is pulled out with force using a crowbar, claw hammer or a special core puller. Then it is child’s play to unlock the door. A cylinder with core pulling protection has a carbide facing in the front. If a burglar tries to screw a screw into the cylinder lock, he will unscrew the thread and the screw will not get a grip. On the website mc-cylinder.nl you can find high quality cylinder locks with core pulling protection.

Security fittings versus core pulling fittings

To complete the security of a lock, use security fittings or even better is core pull fittings like the doorlocks of M&C. What’s the difference between them? Security fittings already make breaking in a lot more difficult than traditional fittings. It consists of an inner and outer shield. The outer shield is used on the outside of the door. It does not contain holes for screws. It does have threaded elevations on the inside. The inner shield is on the inside of the door and does have holes. Screws pass through these holes and are screwed into the elevations of the outer shield. The protection provided by core pulling hardware goes even further. The cylinder of the lock is then enclosed with a metal. Then core pulling becomes a lot more difficult.

Zohaib Chisthi
Author: Zohaib Chisthi

Muhammad Zohaib Providing SEO Services, Writing Services and Guest Posts/Backlinks Services on quality sites. Email:: [email protected] WhatsApp: +923354300573

About Zohaib Chisthi

Muhammad Zohaib Providing SEO Services, Writing Services and Guest Posts/Backlinks Services on quality sites. Email:: [email protected] WhatsApp: +923354300573

Check Also

Trusted South Sydney Electricians: SOS Electrical

SOS Electrical is the go-to service for reliable electrical work in South Sydney. With a …