Vents MagaZine Music and Entertainment Magazine
Related Articles
I was inspired by the amazing artwork of Hari and Deepti and decided to make a 3D paper cut light box. It makes a lovely addition to any home or office, and it’s also a thoughtful present for a special occasion like a birthday or wedding. In any case, you’ll be able to see the piece’s beauty. To put it another way, this light box is made up of paper cutouts stacked on top of each other in a glass box. The 3D effect is achieved by placing LED lights behind each of the layers. In this video, I’ll show you step-by-step how I created this light box, as well as provide you some helpful hints.
1 – Download and Print out the Template
As a result, the first step is to download Papercut lightbox svg files and print the template. In order to get the best results, you’ll want to use a light box that is 8 by 10 inches (20 by 25 centimetres). There are many ways to customise your own design.
For best results, I suggest using 170 gsm white card paper, which is both sturdy and translucent.
So, begin by drawing the first layer of your design onto the card stock and then add a 1 cm border to each layer. This will make it much easy to attach the layers. Nothing will ever be seen in this place.
2 – Use an X-Acto Knife to Slice Through the Layers.
Once you’ve completed the first layer, use an X-Acto knife to cut it out. In order to get the most precise and sharpest cut possible on your projects, the X-acto knife is an unique cutting instrument.
I didn’t have a utility knife at home, so I used this one instead.
Add another layer of card stock on top of the first and trace around it. Afterwards, remove the first layer and complete the second layer. Once all the layers have been cut, repeat the procedure for each one.
3 – A water reflection effect may be achieved in a variety of ways.
As you can see, the pattern on my fourth layer is completely lost on one part. This is because I wanted to create the illusion of water reflections. This layer will be put in front of the “upside down” layer, behind the one depicting a horse. The reflection is first hidden by the paper in the 4th layer, but it becomes apparent when the light is turned on.
For the final layer, I chopped the top half of it since I wanted the moon and stars to stand out more. In order to get a stronger sense of translucency, I utilized an 80 grammes copy paper for this layer. I added a giant moon and stars to the final layer. I used my utility knife to cut out a circle for the moon, then a pin to make little holes in the card stock for the stars.
4 – When you’re done, glue the layers together.
Foam spacers are used to rejoin the layers. As a result, the picture seems three-dimensional and has a sense of depth to it. I removed the foam spacers. All of them are exactly 1 centimetre in diameter. A dozen 25-inch spacers and a dozen 18-inch spacers are all that I needed. Each layer should include four spacers.
Afterwards, I used a glue gun to attach the layers. After adhering the first layer, I’ll place spacers around the perimeter and adhere the second layer on top of that. Ensure that the layers are lined up correctly. Repete this procedure until all of the layers have been bonded in place. You don’t need to divide the three layers with spacers to get a reflection effect; instead, glue them together. Layers are arranged in a clockwise direction, with the upside-down layer appearing first, then the water layer.
