tie down a motorcycle on a trailer without a chock

How To Tie Down A Motorcycle On A Trailer Without A Chock

Securing a bike with a wheel chock
If you want to transport your motorcycle safely then securing it to a trailer with a wheel chock is vital. Without being properly secured, a bike can rattle around in the back and even fall out of the trailer. In the worst-case scenarios, this can even cause serious accidents or injuries.

What is wheel chock?
Wheel chocks are small wedges that you fit underneath the front wheels of your bike, so that it halts from moving back and forth. These are used to prevent accidents and injuries.

Chocking is also known as blocking and it prevents the trucks and trailers from unintentionally moving like rolling or overturning.

Chocks are used to stop the wheel from moving forward while workers are servicing the vehicle or working such as loading, unloading, hitching, and unhitching.

Is it really possible to tie down a motorcycle without a wheel chock ?

In most cases, motorcycle tie-down tutorials will recommend you to use at least one chock. Also, you don’t need a chock at all as long as you have something to stop the front wheel from moving forward from the trailer. 


But what to do if you do not have wheel chocks with you or you do not have the budget to purchase a new one? In such situations, you can use an alternative option, that is, to tie down a motorcycle on your trailer without a chock.

It is very important to ensure that your motorcycle’s tyres remain in place when tying it down safely without chocks. For this, you have to follow a specific process to guarantee its safety.

Things that need to be kept in mind before tying down your motorcycle 

  • Try to find an improvised chock that you can use as a stopper instead of the real thing such as a piece of wood, or brick.
  • You can also use a suitably shaped piece of plastic that can also be used as a wheel chock. It is much better than completely foregoing the use of any chock.
  • It is good to keep in mind the size and weight of your motorcycle that the straps can handle. The heavier the motorcycles are, the more momentum is required to stop them. 
  • Also, bear in mind that more fragile chock replacement pieces are not good to hold or control the bigger and heavier bikes.


Steps to be followed for securely tying down your bike without a chock for the best results

  • The best way to safely tie your bike is by using soft straps. You can secure the ends of your trailer so that they don’t fall while driving down the road. Also, you won’t have any problems if something happens in between.
  • Tie each soft strap to a ratchet strap into a loop. It is a fastener that is used to hold down the vehicle during transport.
  • After tying the straps, compress your shocks a bit. This will prevent the straps from getting disengaged while driving on a bumpy road.
  • Be sure to use two straps at the front and the back, and one on each side for the optimal results.
  • Wrapping some soft straps around the bases of both left and right handlebars will ensure extra security to your bike. It’s not just about checking out the safety of your bike, you can also consider how it will look when riding.
  • Make sure the straps that you have tied are not loose. If so, then tighten them properly until your bike stands perfectly still, even if you throw your entire weight behind it.
  • Before taking your bike on an extended trip, make sure to test the setup a few times by driving around the area. This will allow you to test out your suspension settings and make sure everything is adjusted correctly before heading off for a long ride.
     

That’s it! These are the steps that you have to follow to tie down your motorcycle on a trailer without a chock and YES, it is completely possible. However, the straps must be ultra-secure and very tight to ensure safe transportation of your vehicle.


Should You Tie Down A Motorcycle Without A Chock? – A Conclusion

Tying down your bike should accomplish a fine job of preventing its movement while you drive around. Therefore, it is strongly advised to avoid tying down a motorcycle without a chock if it can be avoided.

Whenever possible, either get a wheel chock or a replacement material such as bricks or  but a chock is always a prudent safety measure for it.

However, if you still do not want to use chocks then make sure that you invest in high-quality soft straps and hooks to tie your motorcycle. 

About Deny Smith

Check Also

4 Ultimate Event Planning Tips in 2022

Looking for event planning advice? You have come to the right place. We have participated …