A security camera installation in Melbourne may seem a little pressuring (even daunting) for a number of reasons. Some find the entire process challenging, others find it too expensive. While both reasons hold water, know that such should not be enough to keep any homeowner/business owner from installing cameras.
Here, this lifesaving camera takes the spotlight. The camera’s different facets are discussed to provide a better understanding of its inner workings. Components, types, and installation reminders are discussed to reduce apprehensions that people have towards the security camera.
Security Camera 101
Security cameras, home alarm systems in Melbourne, surveillance cameras- they are all the same. These cameras bring forth security, peace of mind, and protection towards lives and properties. For best results, installation experts must take the lead. However, it pays to know its various features, character, and other facets for proper guidance. As they
Components and Types of Security Cameras
Here are the different components of security cameras. Shortly after, the different types of security cameras are also discussed.
- Security Cameras
- Cabling and Wiring
- Storage (Hard Drive, Cloud, etc.)
- NVR or Network Video Recorder
This camera is called such because of its size and form. Because of its form, it can accommodate night-vision and other advanced infrared features. The bullet camera is used to monitor specific areas. To widen its surveillance scope, it has a tri-axis mount to cover different parts of the property where the focus is necessary.
This usually has the shape of a small dome and offers a wider range of view compared to the bullet camera. Also, it is a little bit more subdued. Therefore, if one desires to have a more discreet option for surveillance, the dome camera is a good option. Because of the wider field of view, the dome camera is ideal for bigger properties such as retail stores, offices, factories, etc.
Just like the dome camera, the fisheye also has a wide range of views. However, the images and footage captured may seem a little distorted. Therefore, the fisheye camera is ideal for capturing any action in a specific property without focusing too much on finer details. It is best used in warehouses and factories with fitouts in Melbourne where monitoring movement is more important.
From the name itself, the doorbell camera is a small security camera with a door buzzer and 2-way intercom. Many people like the doorbell camera because of its versatility. Aside from surveillance, it also acts as an intercom system. Even better, the coverage and communication can be wired into the smartphone through an app.
More than anything else, people use the wireless camera for its convenience and remote accessibility. Just like the doorbell camera, it can be manipulated via an app. Real-time images/video footage can also be viewed remotely.
However, wireless cameras are mostly recommended for small to medium-sized premises/properties such as regular households or offices. This is so because zooming in images and videos captured from long distances may appear distorted or blurred.
Security Camera Installation
Here are important things to remember during the security camera installation process:
Avoid any vision impediments or disturbances
Make sure that there is no backlighting or any lens flare in the area where the camera is going to be installed. For context, backlighting happens when a bright light coming from any of the sources (see below) makes the image/footage pale or even almost white. Hence, the footage becomes useless.
Flaring and backlighting may be caused by the following sources:
- Direct sunlight
- Security light
- Street lights
- Lights coming from any parts of the house with close proximity to the security camera
To avoid these issues, make sure that the camera is away from direct sunlight or any exposure to the aforementioned light sources. If the camera has night-vision, it practically does not need a strong light source to capture images and footage even in the dark. This rids off the need to find an adequate light source which may be more problematic.
Must be out of reach or difficult to access
This is so for two major reasons:
- Being out of reach most of the time translates to an elevated mounting. When the security camera is elevated, it has a greater chance of capturing footage at a wide viewing field. Its viewing angle also significantly increases.
- As the camera is mounted at a certain elevation, it becomes relatively protected from tampering. Thieves target security cameras so they can go on with their criminal acts with the thought of not getting caught. If it is high up and securely mounted, it will take a significant time to destroy it (enough time until the property owner and authorities find out about the planned burglary or trespassing).
WiFi connectivity should be seamless
Needless to say, the farther the camera is to the router, the poorer its signal gets. As the signal strength drops, it becomes less capable of capturing real-time images. Also, the footage quality becomes compromised as well. Therefore, ensure that the entire camera unit is closer to the router to achieve its best functionality.
Protection but never privacy invasion
Security camera installation is aimed to protect loved ones and the entire property as well. However, the installation process has to be dealt with utmost regard to the privacy of others. Ensure that the camera is installed directed towards one’s own property and its immediate premises only. It should not (in any way) be directed towards others properties where their privacy can be jeopardized.
Truth be told, these cameras have increasingly become part of everyone’s lives. More and more businesses and homeowners have it installed. However, the Do-It-Yourself installation process has become rampant, thanks to readily available online resources. While DIYs add a little bit of fun and adventure, they can also be potentially damaged or lose the camera’s effectiveness altogether.
To achieve success in security camera installation in Melbourne, it is best to contact an expert and reputable company to get the job done. The entire procedure has to be done with extreme precision and accuracy- something that only experts can do. Since the process involves overall security (life and property), it is best not to tinker with the steps through random online videos or blogs.