Plumbing issues are never-ending. And sometimes, homeowners think if some of the basic things can be handled without asking a plumber to visit them. The good news is that there are a few minor plumbing issues that you can take care of as well. For example, overflowing toilet or dripping faucets problems can be taken care of. However, you need to have the right tool to fix these plumbing issues. If you aren’t that confident, call a plumber in Atlanta to get the problem resolved. Better not try anything.
Here are six useful tips that will enable you to take care of a few plumbing problems. Small leaks and clogs can be fixed without asking a professional to visit you. However, do keep in mind that these are only basic things that can be done. If the problem is severe, you must contact a plumber in Woodstock.
- Parts inside the faucet or toilet can be replaced
One of the common causes of leaks is the worn flappers. You will find it in the toilet tank or bowl. Flappers will cost you only a few dollars. Plus, the product will come along with an instruction manual as well. If you have a modern faucet, the whole interior can be replaced with a fresh cartridge. To do that, you will have to remove a few screws. So, if you feel that the toilet is running non-stop, or else the sink in your bathroom or kitchen is dripping, try getting some replacement parts.
- Clogs can be removed
After using the shower, if you notice that the drain is getting cleared very slowly, don’t search on the internet for drain cleaners right away. You can try manual clogging. Just use a drain shake, insert it, pull back, and that should unclog everything that was not allowing the water to drain smoothly. If this trick doesn’t work, you can use a wet/dry shop vacuum to remove the clog. This one is a hassle-free process.
- Take a look at the showerhead
If the showerhead is dripping water, you can try using thread tape. If water is dripping, there is a massive chance that the threads are not properly connecting. For this, you will have to unscrew the showerhead first. Now take a new tape and wrap it in a clockwise direction. Go ahead and re-attach it, and you will see that dripping has stopped.
- Thread tapes can be used as sealing compounds
For dripping issues, you can use pipe threads. This works wonderfully and should stop the dripping. Multi-purpose tapes are a good option. Go for the white ones because the yellow ones, which are thicker, are used for gas, while the pink ones are for water. Go for a more adhesive tape, which will handle dripping water issues easily.
- Use heat is tough water flows from the pipes
When the fittings become more laborious, no matter how much force you use, it becomes impossible to budge the joint. For this, you can use some heat. The heat will loosen up the solidified and old pipe dope. If you have a propane torch with you, that should do the trick. Apply the heat for a few minutes. And to protect the nearby walls, you should use some heat-resistant materials.
- Making the water heater more efficient
Check the thermostat of your water heater and ensure that it is not set extremely high. Even if it is below 115 degrees, you will still have some hot water. Also, do insulate the tank of the water heater. This way, the water will remain warm for a longer time.
These are some basic things that can be done. However, you should always keep a plumber’s number ready. You can visit Mr Rooter Plumbing of Atlanta to call a plumber in Woodstock..