Robotic pool cleaners and are excellent at maintaining the cleanliness of your pool. These smart machines are efficient and can save you valuable time. However, even if you own one, it’s still necessary to use your manual pool vacuum once in a while.
There are certain pool issues that even the most advanced robot according to the reviews cannot handle like algae blooms. If the amount of filth in your backyard pool is too much for your automatic pool cleaner, the best route to take is the manual method.
Vacuuming your pool requires a bit more work, but it’s a fantastic way to ensure your pool is debris and dirt-free. Likewise, the benefits of that extra effort will be worth it. Aside from making your pool look nicer, it’ll help prevent algae buildup, balance your pool water, and chemicals will work more effectively.
Pool Vacuum Must-Have Checklist
Make sure to prepare everything first before vacuuming your pool to ensure the job gets done properly. Here’s a checklist of the things you’ll need:
- Telescopic pole. As a pool owner, there’s a good chance that you already own a telescopic handle and other attachments like brushes, skimmers, and nets. Most are standard in size, so you can easily connect it to other attachments.
- Vacuum or vac head. A vacuum head is an essential part of keeping your pool clean. Most vac heads can fit all types of telescopic poles. Nonetheless, make sure to get a vacuum head suitable for your pool type. Consider asking a local pool expert if you have no idea which is right for you.
- Vacuum hose. This attaches the vac head to the pool pump through the skimmer inlet that provides the power to suck up debris. The hose length you need will depend on your pool’s size.
- Vacuum plate. Also known as a skim-vac or skimmer plate, this is the equipment that attaches your hose to the skimmer inlet.
Steps On How To Vacuum Your Pool
Now that you’ve gathered your equipment, you’re ready to start with the task. Here are the steps to follow when vacuuming your inground or above-ground pool:
Step 1: Set up your vacuum
This step is pretty simple and quick to do. You only need to attach your vac head to the telescoping pole, which should easily snap on.
Step 2: Attach the hose to your vacuum
Connect one end of your hose to your vac head. Then, proceed with the next step before attaching the other end to the pump.
Step 3: Prime your pool vacuum
You need to prime your vacuum first by clearing your vacuum system of all air.
Simply lower the vac head, with the help of your telescoping handle, all the way down to the bottom of your pool floor. Then, drive the hose’s other end against the jet and let it push all those air out of your hose.
You’ll know that there’s air flowing into the hose when there are air bubbles floating up from your vac head. Once cleared of bubbles, your hose is free of air pockets.
Getting rid of air pockets early on can prevent your unit from losing suction. Likewise, it will help ensure the system will run longer.
Step 4: Attach the pump
Your pool’s circulation pump powers the skimmer inlet. So using your vacuum plate, connect the other end of the hose to the skimmer.
Do not forget to take out the strainer basket before doing this step. And then, plug the vacuum hose into the suction port, which is located at your skimmer’s bottom part.
Step 5: Select the setting of the valve filter
Set your multiport valve filter to “Filter” if you’ll do light vacuuming. Choose the “Waste” setting of the system if you plan to do bigger tasks or if you have a massive amount of filth to clean. This will not send the water into the filter, but rather, down the drain.
Step 6: Start vacuuming your pool
Start cleaning by maneuvering your pool vac in slow and linear passes. This is similar to how you’d clean your carpeting using an upright vacuum cleaner. Doing it in a fast manner will simply stir up filth, which your vacuum will not be able to suck up.
You may need to stop to empty the pump basket if your pool is very dirty before continuing with your cleaning job. Repeat steps 1 to 5 when you lose suction.
To give you a better idea of how to ready your pool vacuum, you can view the whole process here.
Once you’re done vacuum-cleaning your pool and pleased with the results, remove the vac head and vac hoses from your telescoping pole. Then, empty your hose of any water left inside.
If you change the setting of your filter pump, return it to its “Filter” setting. Also, you may want to consider doing some backwashing if you have a sand filter, as this is a perfect time to do it.
Finish off by scrubbing away any grime, particles, and algae from the floors and sides of your pool. Simply attach a brush to the telescoping handle and scrub your heart away.
After this, clear the pump basket of any debris, test the water, and if necessary, adjust its chlorine, pH, and alkaline levels.
How Often Do I Need To Vacuum My Pool?
It’s advisable to vacuum your swimming pool at least weekly. Additionally, you need to clean it right away when you see the pool floor acquiring massive amounts of leaves, grime, and trash. This usually happens after extreme weather conditions like heavy storms.
Is It Worthy To Invest In An Automatic Cleaner?
Some pool owners believe that their pool only needs the best filter system. Yes, this is a crucial factor since it can help reduce algae. Also, it’ll ensure that the pH levels of the water stay healthy, which, in turn, can make pool upkeep not as time-consuming.
Nevertheless, even filters of the utmost quality out there can’t do all the job by itself. So if you want to maintain the freshness, beauty, and health of your pool, you need an extra helping hand from an automatic pool cleaner.
You’ll especially see the value of a robot pool cleaner after a few sessions of manually vacuuming and scrubbing your pool.