Aerial lift workers perform a variety of tasks in day to day basis, whether it is large-scale construction work to heavy machinery maintenance. They play a crucial role in handling work in various industrial settings.
Aerial lifts are heavy pieces of machinery that allows workers to do a certain job at heights. Workers rely on aerial lifts for an endless array of job duties, such as painting, fruit picking, drywall maintenance, and a lot more. It is used for both outdoor and indoor projects.
Aerial lift painters deal with unique safety risks while getting their jobs done correctly. Working in this industry can be rewarding; however, you might be exposed to certain hazards if safe practices of work are neglected. Thus, they need to be aware of job risks such as tip-overs and falls while balancing their workplace environments.
Here is the list of five safety tips operators must keep in mind before starting the AWP (aerial work platform) painting project:
Make Sure to Use Lifts Properly
There are many ways a person on AWP can do something wrong; thus, we need to discuss safety from hazards in regards to the lifts. One thing that often gets missed is any person in an aerial lift, at a certain height, should be properly tied-off.
It not only refers operators to be safeguarded to the engineered anchor point, but it means that they also need a lanyard that is going to protect them at the height of which they are working.
If you are working on scissor lifts, things might be a little different. While the job site you are working on or the supervisor of the facility may need you to tie-off in the lift, there is no regulative requirement.
With a chartered boat, you can do anything or go anywhere that your vessel can take you, so long as you have the means to do so. There are, however, some companies that provide a service when you charter a boat. Wings Bareboat Charters have the option to get a local captain that can skipper the boat for you and give you handy tips and recommendations that only a local would know.
However, that doesn’t mean you neglect to close your gate or secure your chain. By doing so, you are no more protected by the rails and will be in a fall protection violation. Also, make sure to put both your feet planted firmly on the platform lifts.
Aerial Lift Operator Training= Safe Work At Heights!
According to OSHA standards, employers should ensure to provide a safe and healthful workplace. Operator training cannot be stressed enough if you want operators to work safely at heights. Training is not only mandatory by law, but also there is just too much room for confusion and error when it comes to operators without the proper knowledge.
Falls and tip-overs are some of the leading killers in construction year after year. Arm your aerial lift painters with the knowledge and skills they need to keep themselves safe. So, get started with AerialLiftCertification.com today and make your workplace safe and hazard-free.
Inspect Your PPE
Do you inspect your PPE regularly?
Workers at heights use all the personal protective equipment they want, but if they are not inspected on a daily basis, it could be severely dangerous. When it comes to harnesses or lanyards, they have to be inspected regularly by a Competent Person as well as must be checked before every use.
In order for this to fulfill safely, your operators have to understand what they are searching for, what is acceptable, and what to do if they find an issue. The inspection must be thorough, but does not have to take a lot of time. Although, this quick pre-work inspection could save a life.
Working at heights safely does not come instantly, or it’s not something that happens by chance. It takes education, preparation, and determination. When it comes to avoiding safety hazards, there is a vast knowledge you need to gain that is only possible with proper training.